Your no.1 choice for Cheap Electric Guitars - Cheap Acoustic Guitars - Cheap Guitar Effects pedals - Guitar Books and a whole host of other cheap musical instruments

Cheap M-Audio SBX10 Active Subwoofer

M-Audio SBX10 Active Subwoofer



The M-Audio SBX10 active subwoofer is designed to give your monitoring system some serious low end. The SBX10 delivers tight, clean bass response down to 20Hz - revealing the extreme low frequencies in your music so you can make accurate mixing decisions.

Comprising a 10" fiberglass/paper composite driver, a 240-watt all-discrete internal amplifier, and a variable 50-200Hz crossover, the SBX10 subwoofer delivers unbeatable performance in a compact chassis - great for studios where space is tight. An oversized magnet, high-temperature voice coil, high-density cabinet and a full complement of inputs are just some of the additional components that round out this high-quality design. The unit even includes a bypass footswitch so you can easily judge how mixes will sound with and without a dedicated subwoofer. The SBX10 represents the perfect addition to any studio monitor setup.


  • Type: Bass-reflex active powered subwoofer

  • Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround

  • Frequency Response: 20-200Hz (-3dB)

  • Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment

  • Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum

  • Adjustable Gain: (-30dB to +6dB)

  • Amplifier: 240 watts average power into 4, discrete transistor design

  • Signal-to-noise ratio: 96dB (A-weighted)

  • THD at rated power, mono mode: 0.019%

  • Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA

  • Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites

  • Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack

  • Input impedance: 20k ohms balanced, 10k ohms unbalanced

  • Maximum input level: +20dBU

  • Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection

  • Indicator: Power on (blue) or standby/bypass (red)

  • Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable

  • Cabinet: Vinyl-laminated high-density internally braced 3/4" MDF cabinet with 1" front and back baffles


  • Height: 15.5"/39.4 cm (h)
  • Width: 13"/33 cm
  • Depth: 17.25"/43.8 cm
  • Weight: 54.6 lbs.; 24.75 kg